Storage

planning/designing

Optimization

Financial solutions

Maintenance

Practical training

Since 1985

MB Conveyors has more than 30 years of tradition and experience in mechanical industry and production of conveyor belts. The main qualities of the company are systemic functionality and profitability, commitment to clients, research and development with the support of experts.

Product quality is ensured through meticulous testing in all production steps along the line, with the use of most up-to-date production systems and materials of superior quality.

About the company and its products (PDF 25.2 MB)

Categories

Conveyors

 

 

Separators

 

 

Elevators

 

 

T50 Compact

 

 

Conveyors line

 

 

Cooling

 

 

Storage

 

 

Food and Pharma

 

 

Metal detector

 

 

Plastic and metal belt

 

 

PET solutions

 

 

Top control

 

 

Models

TVC turntable storage system

TVC turntable storage system

  • The turntables start from a basic model called the TV and then, depending on their use, are characterized as:
    – turntables for containers which are the TVC model
    – turntables for bags which are the TVS model
  • Technical features of basic turntable model called the TV:
    disc made of 4mm thick AISI 430 on which tables rest
  • The features of the TVC (turntable for containers) and TVS (turntable for bags) are defined during the commercial offer. Model and features depending on the type and dimensions of the container
  • Standard tables motor supply voltage 400 Volts/50 Hz

Read more (PDF 25.2 MB)

TVS turntable storage system

TVS turntable storage system

  • The turntables start from a basic model called the TV and then, depending on their use, are characterized as:
    – turntables for containers which are the TVC model
    – turntables for bags which are the TVS model
  • Technical features of basic turntable model called the TV:
    disc made of 4mm thick AISI 430 on which tables rest
  • The features of the TVC (turntable for containers) and TVS (turntable for bags) are defined during the commercial offer. Model and features depending on the type and dimensions of the container
  • Standard tables motor supply voltage 400 Volts/50 Hz

Read more (PDF 25.2 MB)

Duck dispenser

Duck dispenser

  • Duck dispenser can work with two different methods not compatible with one another:
    – using an A/C voltage-free signal, coming from the IMM at each moulding cycle
    – setting the filling time for each container
  • The chute of the DUCK can rotate through 360° and can conduct the product to any point of the route
  • Capacity: do not exceed 2 kg for each product
  • Installed power of motor for chute rotation: 0.06 kW
  • Standard motor supply voltage: 400 Volts/50 Hz

Read more (PDF 25.2 MB)

CAR - Horizontal carousel

CAR – Horizontal carousel

  • The photo above shows a CAR horizontal carousel
  • The logic involves counting the IMM moulded items to be stored in each container. On reaching the preset quantity, the carousel rotates the containers so that an empty one is placed in the loading area
  • The CAR carousel is controlled by means of the MB control panel
  • The image below shows the application of the CAR indicated above
  • The empty containers are positioned on the mobile frames of the CAR and are moved by a chain mechanism

Read more (PDF 25.2 MB)

CAV Storage System

CAV Storage System

  • The drawing alongside shows a vertical carousel with two floors with side lift
  • The upper conveyor is filled of empty containers. As a container is filled a lift transfers it to the bottom conveyor
  • The area of vertical movement of the lift is complete with a special protection device

Read more (PDF 25.2 MB)

Filling Storage System - Orthogonal filling system

Filling Storage System – Orthogonal filling system

  • The image alongside shows a product storage system to be positioned beside the IMM
  • The operating logic involves counting the moulded items to be stored inside the container

Read more (PDF 25.2 MB)

Weighing Storage System

Weighing Storage System

Storage system with weighing function and containers positioned on a turntable

  • The solution shown in photo above combines precise counting with containers positioned on one of our mod. TVC.3 standard turntables
  • The quality of the process depends on the absolute stability of the weighing cells. In this application, the weighing hopper has its own base to absorb the vibrations created by other components in the system

Storage and weighing system with bags

  • The picture below shows another possible application (collection in bags) for the storage and weighing system

Read more (PDF 25.2 MB)

MI Vertical Mixer

MI Vertical Mixer

  • The MI vertical mixer is a solution that has always been used for mixing plastic material granules
  • The vertical mixer consists of an outer frame made of painted sheet metal and an internal screw inside a tube for mixing the contents
  • The material to be mixed is fed into the loading hopper, the screw receives it from below and carries it upwards releasing it on top, spreading it inside the mixer body with a radius of 360°. After about 15/20 minutes, the material is perfectly mixed
  • The mixer supply includes the control panel constructed in compliance with EEC standards, with the Start and Stop functions and time settings for Run and Hold
  • The inspection hatches for the screw conveyor and mixer are protected by safety microswitches

Read more (PDF 25.2 MB)

MI1 Mixer

MI1 Mixer

  • The photo alongside shows a vertical mixer for mixing small quantities of product or, as is often the case, for moulding tests or materials test
  • It is therefore suitable when the product batches are not very large
  • The mixing principle remains unchanged: on request, the screw is enclosed in a tube, the material is fed from the top. The mixed product is usually taken by means of a suction nozzle and fed into one of the two cone-shaped side tubes of the container
  • The gate valve for rapid unloading and/or cleaning inside the mixer hopper and the hopper lid are protected by micro switches

Read more (PDF 25.2 MB)

Business lines

Automotive

medical

packaging

technical molding

teletronics

ENERGY EFFICIENCY

Energy efficiency is a concept that in our part of the world became important towards the end of 2008 and the beginning of 2009, at the outset of the world economic crisis. Most business people had, until then, mostly declaratively considered power consumption as a significant element of the total cost analysis. In these considerations, the impact of energy efficiency on the environment pollution had hardly been tackled at all.

Neofyton was among the first companies in Serbia and the region to start actively demonstrating the importance of energy efficiency, both by cutting production costs and therefore increasing profit rates and building awareness of the resource shortage and broader ecological principles.

Energy savings through the use of Neofyton's machines

In comparison with our direct competitors in the field of plastics injection machines, and with the utilization of standard hydraulics with integrated so-called "smart" pumps, our machines consume as much as 50% less energy. The use of servo-hydraulics opens up the potential of savings as high as 70%. We have a very precise power consumption measuring device to prove this.

The company Engel was the first plastics injection machine manufacturer back in 2009, which introduced the power consumption page as a standard component of the control assembly – "Ecograph", where - next to the weight of each product (molded part) in every cycle - total hourly consumption is shown, as well as the specific power consumption per one kilogram of processed plastics (kWh/kg).

ENVIRONMENTAL PROTECTION

The equipment we represent contributes to ENVIRONMENT PROTECTION in several ways.
When it comes to ancillary equipment, above all water chillers by our supplier Eurochille, used for temperature control of both hydraulics and machine servo motors and molds (tools) in which finished products are made, the chiller systems we sell facilitate the use of a new cooling system based on the so-called "adiabatic effect".

In summer, the hydraulics and servo motors of the injection molding machines call for cooling with water at a maximum of 28°C. Using the so-called "free cooling" device with the "adiabatic effect", cooling of process water is performed without cooling compressors (which use freon as the heat exchanger). Heat exchange, i.e. cooling happens exclusively by the use of ventilators, which translates into six- to eightfold savings compared to traditional chillers that use freon-based compressors.

One of our customers has reduced the required cooling energy by 1.400.000 kWh per year, i.e. by about 70.000 EUR, using the "adiabatic" cooling devices. An additional benefit is the elimination of major pollution risks which might arise from emissions of freon into the atmosphere due to tube puncture or breakage.

A similar calculation can be applied to our Engel injection molding machines, as well as to the Piovan granulate dryers.

Neofyton – partner of MB Conveyors

Neofyton is MB Conveyors’ partner for the markets of Serbia, Bosnia and Herzegovina, Macedonia, Nigeria, and Cameroon.

FSRV PLUS independent spiral roller separator – a new generation separator, designed to improve performances of the traditional spiral roller and to achieve particularly precise and efficient separation of the product from the sprue.

Neofyton youtube chanel

Neofyton provides “turnkey” solutions

From system design to machine installation and training

Neofyton partners

Proud members

Contact us

4 + 11 =