Food and pharma
planning/designing
Optimization
Financial solutions
Maintenance
Practical training
Models
F.D.A. customized N-PA
F.D.A. customized N-PA
- The photo alongside shows the F.D.A.version of the N-PA conveyor
- This conveyor is used for conveying plastic components which will then be used in the food and/or pharmaceutical sector
- All the plastic components and the conveyor belt conform to F.D.A. standards
F.D.A. customized N-CPR conveyor
F.D.A. customized N-CPR conveyor
- The photo alongside shows an F.D.A. customised N-CPR conveyor
- The belts of all the F.D.A. customised conveyors have a covering, and when necessary slats, made of white foodgrade PU. An technical sheet is available if requested, with the manufacturer’s certificate of conformity of the belt
- On demand, an Easy Line version is available, with simplified supporting legs
F.D.A. customized special CP conveyor
F.D.A. customized special CP conveyor
- The photo alongside shows a conveyor made for insertion in the longitudinal position inside a IMM
- The product collection hopper at the mould outlet is made of AISI 304 stainless steel and is provided with a box for quality control
- The entire tract along which the product moves on the conveyor is protected by a polycarbonate cover
F.D.A. customized N-CPTR conveyor
F.D.A. customized N-CPTR conveyor
- In this version, the inclination of the upward section can be adjusted between 25° and 50° (like the standard N-CPTR conveyors)
- The F.D.A. series of conveyors has a great impact when inserted inside a production area because it gives an immediate image of the quality and the degree of cleanliness of the section
- On demand, an Easy Line version is available, with simplified supporting legs
F.D.A. customised CPT with dust guards
F.D.A. customised CPT with dust guards
- The photo shows a newly conceived CPT conveyor equipped with structured polycarbonate dust guards
- Note the special loading hopper where a compartment was obtained so that the conveyor, usually flat and located inside the IMM, can access and unload the product on the CPT without external contamination
F.D.A. customized special EV elevator
F.D.A. customized special EV elevator
- The photo alongside shows an F.D.A. customised elevator for the collection and elevation of components for food and/or pharmaceutical products
- This is the F.D.A. version of the EV 600 – EV 800 – EV1000 model standard elevators
- The F.D.A. customised elevators have the following standard features:
– loading hopper complete with openable polycarbonate lid
– internal side panels with AISI 304 stainless steel coating - The level sensor and MB control panel complete the elevator
Categories
Conveyors
Separators
Elevators
T50 Compact
Conveyors line
Cooling
Storage
Food and Pharma
Metal detector
Plastic and metal belt
PET solutions
Top control
Since 1985
MB Conveyors has more than 30 years of tradition and experience in mechanical industry and production of conveyor belts. The main qualities of the company are systemic functionality and profitability, commitment to clients, research and development with the support of experts.
Product quality is ensured through meticulous testing in all production steps along the line, with the use of most up-to-date production systems and materials of superior quality.
About the company and its products (PDF 25.2 MB)
Business lines
Automotive
medical
packaging
technical molding
teletronics
ENERGY EFFICIENCY
Energy efficiency is a concept that in our part of the world became important towards the end of 2008 and the beginning of 2009, at the outset of the world economic crisis. Most business people had, until then, mostly declaratively considered power consumption as a significant element of the total cost analysis. In these considerations, the impact of energy efficiency on the environment pollution had hardly been tackled at all.
Neofyton was among the first companies in Serbia and the region to start actively demonstrating the importance of energy efficiency, both by cutting production costs and therefore increasing profit rates and building awareness of the resource shortage and broader ecological principles.
Energy savings through the use of Neofyton's machines
In comparison with our direct competitors in the field of plastics injection machines, and with the utilization of standard hydraulics with integrated so-called "smart" pumps, our machines consume as much as 50% less energy. The use of servo-hydraulics opens up the potential of savings as high as 70%. We have a very precise power consumption measuring device to prove this.
The company Engel was the first plastics injection machine manufacturer back in 2009, which introduced the power consumption page as a standard component of the control assembly – "Ecograph", where - next to the weight of each product (molded part) in every cycle - total hourly consumption is shown, as well as the specific power consumption per one kilogram of processed plastics (kWh/kg).
ENVIRONMENTAL PROTECTION
The equipment we represent contributes to ENVIRONMENT PROTECTION in several ways.
When it comes to ancillary equipment, above all water chillers by our supplier Eurochille, used for temperature control of both hydraulics and machine servo motors and molds (tools) in which finished products are made, the chiller systems we sell facilitate the use of a new cooling system based on the so-called "adiabatic effect".
In summer, the hydraulics and servo motors of the injection molding machines call for cooling with water at a maximum of 28°C. Using the so-called "free cooling" device with the "adiabatic effect", cooling of process water is performed without cooling compressors (which use freon as the heat exchanger). Heat exchange, i.e. cooling happens exclusively by the use of ventilators, which translates into six- to eightfold savings compared to traditional chillers that use freon-based compressors.
One of our customers has reduced the required cooling energy by 1.400.000 kWh per year, i.e. by about 70.000 EUR, using the "adiabatic" cooling devices. An additional benefit is the elimination of major pollution risks which might arise from emissions of freon into the atmosphere due to tube puncture or breakage.
A similar calculation can be applied to our Engel injection molding machines, as well as to the Piovan granulate dryers.
Neofyton – partner of MB Conveyors
Neofyton is MB Conveyors’ partner for the markets of Serbia, Bosnia and Herzegovina, Macedonia, Nigeria, and Cameroon.
FSRV PLUS independent spiral roller separator – a new generation separator, designed to improve performances of the traditional spiral roller and to achieve particularly precise and efficient separation of the product from the sprue.
Neofyton youtube chanel
Neofyton provides “turnkey” solutions
From system design to machine installation and training
Neofyton partners
Proud members
