Conveyors
planning/designing
Optimization
Financial solutions
Maintenance
Practical training
Models
PA standard flat conveyor
PA standard flat conveyor
- Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anodisation average thickness 15 micron
- Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); vulcanised belt joint
- Minimum and maximum temperature resistance of belt: -10°C to +90°C
- Standard transmission group consisting of 0.12 kW, three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication
- Fixed standard conveyor speed 3 m/min
- Conveyor complete with Siemens Start and Stop switch/motor cut-out, with 5 m cable and 4P CE plug (3 phases+ground)
- Standard motor supply voltage 400 Volts/50 Hz
PAR Conveyor with adjustable flat upper section
PAR Conveyor with adjustable flat upper section
- Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anodisation average thickness 15 micron
- Standard cut-proof, oil-proof belt, with green high grip PVC covering (ref. Pantone 320); vulcanised belt joint
- Minimum and maximum temperature resistance of belt: -10°C to +60°C
- Standard transmission group consisting of 0.12 kW, three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication
- Fixed standard conveyor speed 3 m/min
- Conveyor complete with Siemens Start and Stop switch/motor cut-out, with 5 m cable and 4P CE plug (3 phases+ground)
- Standard motor supply voltage 400 Volts/50 Hz
PA Robot conveyor for working with Robot
PA Robot conveyor for working with Robot
The photo above shows the PA conveyor complete with polycarbonate guards.
The PA model conveyor (110×30 mm lateral section) is found to be the most suitable for this purpose because of:
- the sturdiness and solidity of the structure
- the possibility of installing/removing the containment side panels
- possibility of installing control photocells above the side panels and inside these
- facility of installation of the Robot protection structure
PA 180 flat conveyor
PA 180 flat conveyor
- Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anodisation average thickness 15 micron
- Standard cut-proof, oil-proof belt, with black Polyurethane covering; vulcanised belt joint
- Minimum and maximum temperature resistance of belt: -30°C to +90°C
- Standard transmission group consisting of a three-phase asynchronous motor having power appropriate for the dimensions and required capacities, coupled with worm reduction unit with permanent lubrication
- Fixed standard conveyor speed 5 m/min
- Conveyor complete with Siemens Start and Stop switch/motor cut-out, with 5 m cable and 4P CE plug (3 phases+ground)
- Standard motor supply voltage 400 Volts/50 Hz
Conveyor CURVES
Conveyor CURVES
The photo alongside shows the F.D.A. version of the conveyor with 90° bend with parallel rollers:
- In this solution all the structural framework parts of the conveyor are made of 304 AISI stainless steel
- Conveyor suitable for conveying food and pharmaceutical products
- The conveyor belt, blue in this case according to the customer’s request, is completely compatible with the F.D.A. standards
N-TR Conveyor
N-TR Conveyor
- Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anodisation treatment thickness 15 micron
- Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); with heat-welded slats h=30mm pitch 400 mm; vulcanised belt joint
- Minimum and maximum temperature resistance of belt -10°C to +90°C
- Standard transmission group consisting of 0.12 kW three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication
- Fixed standard conveyor speed 3 m/min
- Conveyor complete with Siemens Start and Stop switch/motor cut-out with 5 m cable and 4P CE plug (3 phases+ground)
- Standard motor supply voltage 400 Volts/50 Hz
N-CPR Conveyor
N-CPR Conveyor
- Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anodisation treatment thickness 15 micron
- Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); with heat-welded slats h=30mm with pitch 400 mm; vulcanised belt joint
- Minimum and maximum temperature resistance of belt -10°C to +90°C
- Standard transmission group consisting of 0.12 kW three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication
- Fixed standard conveyor speed 3 m/min
- Conveyor complete with Siemens Start and Stop switch/motor cut-out, with 5 m cable and 4P CE plug (3 phases+ground)
- Standard motor supply voltage 400 Volts/50 Hz
N-CPTR Conveyor
N-CPTR Conveyor
- Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anodisation treatment thickness 15 micron
- Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); with heat-welded slats h=30 mm with pitch 400 mm; vulcanised belt joint
- Minimum and maximum temperature resistance of belt -10°C to +90°C
- Standard transmission group consisting of 0.12 kW three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication
- Fixed standard conveyor speed 3 m/min
- Conveyor complete with Siemens Start and Stop switch/motor cut-out with 5 m cable and 4P CE plug (3 phases+ground)
- Standard motor supply voltage 400 Volts/50 Hz
- On demand, an Easy Line version is available, with simplified supporting legs
N-PA Easy Line flat conveyor
N-PA Easy Line flat conveyor
- Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by anodisation average thickness 15 micron
- Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); vulcanised belt joint
- Minimum and maximum temperature resistance of belt: -10°C to +90°C
- Standard transmission group consisting of 0.12 kW, three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication
- Fixed standard conveyor speed 3 m/min
- Conveyor complete with Siemens Start and Stop switch/motor cut-out, with 5 m cable and 4P CE plug (3 phases+ground)
- Standard motor supply voltage 400 Volts/50 Hz
Categories
Conveyors
Separators
Elevators
T50 Compact
Conveyors line
Cooling
Storage
Food and Pharma
Metal detector
Plastic and metal belt
PET solutions
Top control
Since 1985
MB Conveyors has more than 30 years of tradition and experience in mechanical industry and production of conveyor belts. The main qualities of the company are systemic functionality and profitability, commitment to clients, research and development with the support of experts.
Product quality is ensured through meticulous testing in all production steps along the line, with the use of most up-to-date production systems and materials of superior quality.
About the company and its products (PDF 25.2 MB)
Business lines
Automotive
medical
packaging
technical molding
teletronics
ENERGY EFFICIENCY
Energy efficiency is a concept that in our part of the world became important towards the end of 2008 and the beginning of 2009, at the outset of the world economic crisis. Most business people had, until then, mostly declaratively considered power consumption as a significant element of the total cost analysis. In these considerations, the impact of energy efficiency on the environment pollution had hardly been tackled at all.
Neofyton was among the first companies in Serbia and the region to start actively demonstrating the importance of energy efficiency, both by cutting production costs and therefore increasing profit rates and building awareness of the resource shortage and broader ecological principles.
Energy savings through the use of Neofyton's machines
In comparison with our direct competitors in the field of plastics injection machines, and with the utilization of standard hydraulics with integrated so-called "smart" pumps, our machines consume as much as 50% less energy. The use of servo-hydraulics opens up the potential of savings as high as 70%. We have a very precise power consumption measuring device to prove this.
The company Engel was the first plastics injection machine manufacturer back in 2009, which introduced the power consumption page as a standard component of the control assembly – "Ecograph", where - next to the weight of each product (molded part) in every cycle - total hourly consumption is shown, as well as the specific power consumption per one kilogram of processed plastics (kWh/kg).
ENVIRONMENTAL PROTECTION
The equipment we represent contributes to ENVIRONMENT PROTECTION in several ways.
When it comes to ancillary equipment, above all water chillers by our supplier Eurochille, used for temperature control of both hydraulics and machine servo motors and molds (tools) in which finished products are made, the chiller systems we sell facilitate the use of a new cooling system based on the so-called "adiabatic effect".
In summer, the hydraulics and servo motors of the injection molding machines call for cooling with water at a maximum of 28°C. Using the so-called "free cooling" device with the "adiabatic effect", cooling of process water is performed without cooling compressors (which use freon as the heat exchanger). Heat exchange, i.e. cooling happens exclusively by the use of ventilators, which translates into six- to eightfold savings compared to traditional chillers that use freon-based compressors.
One of our customers has reduced the required cooling energy by 1.400.000 kWh per year, i.e. by about 70.000 EUR, using the "adiabatic" cooling devices. An additional benefit is the elimination of major pollution risks which might arise from emissions of freon into the atmosphere due to tube puncture or breakage.
A similar calculation can be applied to our Engel injection molding machines, as well as to the Piovan granulate dryers.
Neofyton – partner of MB Conveyors
Neofyton is MB Conveyors’ partner for the markets of Serbia, Bosnia and Herzegovina, Macedonia, Nigeria, and Cameroon.
FSRV PLUS independent spiral roller separator – a new generation separator, designed to improve performances of the traditional spiral roller and to achieve particularly precise and efficient separation of the product from the sprue.
Neofyton youtube chanel