Process air chillers

planning/designing

Optimization

Financial solutions

Maintenance

Practical training

Models

Mini ABF

Mini ABF units, available both in air (PA) or water (PW) cooled versions provide cold air at constant temperature regardless of environmental conditions.

FEATURES

  • Increased production up to 30%
  • Constant production parameters
  • Improvement in film quality
  • Reduced energy consumption

see video

Read more (PDF 3.09 MB)

AIR+

AIR+ is an innovative technology designed for the cooling of air blown film lines. An evolution of the BRA+ range, the AIR+ is a stand-alone unit that produces cold air. It works by using the condensing water from a condensing kit or chiller at 15°C ÷35°C, and due to the unit employing the same technology featured in the ABF line, the AIR+ cools in a simple and direct way.

FEATURES

  • Uniform process temperature throughout the year
  • air temperature 5°C
  • HGBP cooling technology
  • Control panel with operation diagnosis
  • Air filter with large surface
  • Ergonomic and compact design

see video

Read more (PDF 3.60 MB)

ABFevo Inverter

ABFevo INVERTER represents the state of the art in cooling technology for air blown film lines and is essential for the most effective processing of the product.

FEATURES

  • Structure made of steel panels painted with polyester powders
  • Evaporator with hydrophilic fins
  • Drops separator with built-in air filter
  • Highly efficient Scroll compressors (refrigerant R407c)
  • Modulating valve with hot gas by-pass system (HGBP)
  • NEW INVERTER control allowing an intelligent control of the cooling capacity
  • Inspectable shell & tube condensers
  • Pressure switch valve adjusting the condensing water flow rate according to the working conditions
  • Electric panel manufactured to IP54
  • Multi-function microprocessor control panel with 7 “touch screen display with simple and intuitive graphic symbols
  • Certificates: CE – PED

PLUSES

  • The new INVERTER control contains all the modules required to comply with the EMC (Electro Magnetic Compatibility) regulations and offers features improving the efficiency and the reliability of the product. The INVERTER allows an accurate control of the air temperature (+/- 0,1°C) and a high optimization of energy consumption.
  • Direct free-cooling with AMK (optional) activated thanks to the cooling of the air through the exchange with colder air. The reduction of the energy consumption is granted and becomes more advantageous, the longer the external air temperature is lower than the one required for the desired cooling.

see video

Read more (PDF 3.23 MB)

BRA+

Cooling capacities of BRA+ air cooling batteries range from 2 to 169 kW. Constructed within a closed framework for maximum insulation and superior performance, the battery may be applied to several different processes including cooling of the bubble of blown film lines. Cold water for the battery is typically provided by a chiller.

FEATURES

  • Large surface area for maximum heat exchange
  • Integral diffuser for low air velocity
  • Removable air filters
  • Proportional 3-way valve for precision temperature control
  • Thermometer monitors ambient temperature
  • Collection tank with drain port for condensate
  • Drops separator (25/170)

see video

Read more (PDF 3.00 MB)

AIR MIX KIT

The purpose of the AIR MIX KIT function is that of exploiting, whenever this is possible, the temperature of the outside air to take advantage of a mixed air to be able to work without using a chiller, i.e. with no energy consumption.

FEATURES

  • WINTER OPERATION: When the outside air temperature drops below the set-point value for a given time, the chiller works only in free-cooling mode. When the temperature of outside air furtherly decreases, the microprocessor activates, the mix of the outside air with the inside one.
  • MID-SEASON OPERATION: It is obtained by combining the free-cooling system with the mechanical cooling one. The operation of the unit in free-cooling mode is activated when the temperature of outside air is 5°C lower than the user’s temperature.
  • SUMMER OPERATION: When the temperature of outside air is higher than the user’s one, the cooling capacity is granted by the work of the compressors; the free-cooling system stays active to optimize the performances of the chiller.

see video

Read more (PDF 2.92 MB)

OFC KIT

The OFC KIT is an easy and economic condensing kit applied for the cooling of heat exchangers and condensers.

FEATURES

  • Air/water exchange battery
  • Enbloc centrifugal electro-pump
  • Water filling with pressure reducer
  • Automatic water spraying system
  • Stainless steel base for pump
  • IP 54 control panel

see video

Read more PDF

Dcooler & ADcooler KIT

The Dcooler and ADcooler * KIT Series have been designed to cool down single or centralized installations under heavy working conditions. All models are supplied with inlet/outlet collectors and water pump for an easier installation.

The ADcooler * line complies with the European antilegionella regulations.

* Patented system

FEATURES

  • The convective technology – Dcooler KIT that provides for the cooling of the water that flowing into the coils by forced circulation of the ambient air at a lower temperature (free-cooling).
  • The adiabatic technology – ADcooler KIT. These units are the natural replacement of the evaporative towers, being able to equal their performances but zeroing water consumption and avoiding the formation of mucilage and limestone which are instead typical in the installation of evaporative towers. Water to be cooled flows into the coil in a closed circuit, while the evaporating water flows on adiabatic pads causing a sharp drop in of the temperature of the sucked air, with no deposit on the coil fins which consequently save their efficiency.

see video

Categories

Process water chillers

 

 

Temperature control units

 

 

Process air chillers

 

 

Process air dehumidifiers

 

 

Process air chillers

Eurochiller, a manufacturer of industrial cooling systems, stands out among its competitors in that it constantly develops “green” technologies and chillers with high energy efficiency.

Neofyton, in co-operation with Eurochiller has expertise in designing and start-up of central cooling systems.

Philosophy of Eurochiller (PDF 3.76 MB)

Products of Eurochiller (PDF 1.30 MB)

Business lines

Automotive

medical

packaging

technical moulding

teletronics

ENERGY EFFICIENCY

Energetska efikasnost u industriji je pojam koji je na našim prostorima postao bitan krajem 2008. i početkom 2009. godine, sa početkom svetske ekonomske krize. Većina privrednika je, do tada, najčešće deklarativno razmatrala trošak struje, kao bitan element kompletnog pregleda troškova. Pritom uticaj energetske efikasnosti na zagađenje prirode gotovo uopšte nije bio razmatran.

Kompanija Neofyton je među prvima u Srbiji i regionu počela aktivno prezentovanje značaja energetske efikasnosti, kako zbog smanjenja troškova proizvodnje, pa samim tim i povećanja profitne stope, tako i zbog podizanja svesti o ograničenosti resursa i širim ekološkim principima.

Ušteda energije korišćenjem Neofyton mašina

U poređenju sa direktnim konkurentima u sferi mašina za brizganje plastike, a korišćenjem standardne hidraulike u koju su ugrađene tzv. “smart” pumpe, naše mašine troše i do 50% manje energije. Korišćenjem servo-hidraulike, postoji potencijal za uštedu do čak 70%. Posedujemo veoma precizan uređaj za merenje potrošnje električne energije, kojim se to i dokazuje.

Kompanija Engel je bila prvi proizvođač mašina za brizganje plastike, još 2009. godine, koji je u svoj upravljački sklop uveo, kao standardnu opciju, stranicu za prikaz potrošnje struje – “Ecograph”, gde se navođenjem težine za svaki proizvod (kalup), u svim ciklusima dobija podatak, kako o ukupnoj potrošnji struje po satu, tako i o specifičnoj potrošnji struje po kilogramu prerađene plastike (kWh/kg).

ENVIRONMENTAL PROTECTION

Oprema koju zastupamo doprinosi OČUVANJU ŽIVOTNE SREDINE na nekoliko načina.
Kada govorimo o pratećoj opremi, a pre svega o čilerima za hlađenje vode našeg dobavljača Eurochille, kojima se temperira kako hidraulika i servo motori u mašinama, tako i kalupi (alati) u kojima se i formiraju gotovi proizvodi, čilerski sistemi koje mi prodajemo omogućavaju novi koncept hlađenja korišćenjem tzv. “adijabatskog efekta”.

U letnjem periodu hidraulika i servo motori mašina za brizganje zahtevaju hlađenje vodom temperature do 28°C. Korišćenjem tzv. “free cooling” uređaja sa “adijabatskim efektom”, hlađenje procesne vode se odvija bez korišćenja rashladnih kompresora (koji koriste freone za izmenu toplote). Izmena toplote, tj. hlađenje se odvija isključivo korišćenjem ventilatora, čime se postiže ušteda od 6 do 8 puta u odnosu na klasične čilere koji koriste kompresore sa freonom.

Jedan od naših kupaca je, korišćenjem “adijabatskih” uređaja za hlađenje, umanjio potrebnu količinu električne energije za hlađenje, za 1.400.000 kWh/godišnje, tj. za oko 70.000 EUR. Dodatna prednost je odsustvo rizika, da usled pucanja cevi dođe do curenja freona u atmosferu i velikog zagađenja.

Slična računica se može primeniti na naše Engel mašine za brizganje plastike, kao i na Piovan sušare za sušanje granulata.

Eurochiller company

Eurochiller – maximum energy efficiency, great energy savings, longer service life of compressors

Neofyton is Eurochiller’s partner for the markets of Serbia, Bosnia and Herzegovina, Macedonia, Nigeria, and Cameroon. Find out more about us, have a look at our capabilities and our installations all over the world.

Neofyton youtube chanel

Neofyton provides “turnkey” solutions

From system design to machine installation and training

Neofyton partners

Proud members

Contact us

4 + 14 =