T50 Compact

planning/designing

Optimization

Financial solutions

Maintenance

Practical training

T50 Compact models

T50-A01

T50 compact conveyor line

  • The T50 compact conveyor line is conceived to meet the requirements of situations of limited space, and / or when the dimensions of the conveyor is a critical issue
  • Sturdy frame of conveyor made of primary extrusion aluminium section, Alloy 6060, protected by anodisation (average thickness 15 micron)
  • Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); vulcanised belt joint
  • Minimum and maximum temperature resistance of conveyor belt: -10°C to +90°C
  • Standard transmission group consisting of 0,12 kW, three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication
  • Fixed standard conveyor speed: 3 m/min
  • Standard conveyor without electrical system and supporting legs. Legs and side panels available as optionals

Read more (PDF 25.2 MB)

T50-B01

T50 compact conveyor line

  • The T50 compact conveyor line is conceived to meet the requirements of situations of limited space, and / or when the dimensions of the conveyor is a critical issue
  • Sturdy frame of conveyor made of primary extrusion aluminium section, Alloy 6060, protected by anodisation (average thickness 15 micron)
  • Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); vulcanised belt joint
  • Minimum and maximum temperature resistance of conveyor belt: -10°C to +90°C
  • Standard transmission group consisting of 0,12 kW, three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication
  • Fixed standard conveyor speed: 3 m/min
  • Standard conveyor without electrical system and supporting legs. Legs and side panels available as optionals
  • B01 configuration, with central drive, is particularly suitable in cases where the conveyor is used in a transport line, for example to connect two other conveyors, or juxtaposed to another one.

Read more (PDF 25.2 MB)

T50-B02

T50 compact conveyor line

  • The T50 compact conveyor line is conceived to meet the requirements of situations of limited space, and / or when the dimensions of the conveyor is a critical issue
  • Sturdy frame of conveyor made of primary extrusion aluminium section, Alloy 6060, protected by anodisation (average thickness 15 micron)
  • Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering (ref. Pantone 320); vulcanised belt joint
  • Minimum and maximum temperature resistance of conveyor belt: -10°C to +90°C
  • Standard transmission group consisting of 0,12 kW, three-phase, asynchronous motor coupled with worm reduction unit with permanent lubrication
  • Fixed standard conveyor speed: 3 m/minStandard conveyor without electrical system and supporting legs. Legs and side panels available as optionals
  • B02 configuration, with central drive located under the conveyor belt, besides being suitable when the conveyor is inserted in a transport line, is particularly recommended when the available space is extremely limited, as it allows to further reduce the overall dimensions of the conveyor

Read more (PDF 25.2 MB)

Categories

Conveyors

 

 

Separators

 

 

Elevators

 

 

T50 Compact

 

 

Conveyors line

 

 

Cooling

 

 

Storage

 

 

Food and Pharma

 

 

Metal detector

 

 

Plastic and metal belt

 

 

PET solutions

 

 

Top control

 

 

Since 1985

MB Conveyors has more than 30 years of tradition and experience in mechanical industry and production of conveyor belts. The main qualities of the company are systemic functionality and profitability, commitment to clients, research and development with the support of experts.

Product quality is ensured through meticulous testing in all production steps along the line, with the use of most up-to-date production systems and materials of superior quality.

About the company and its products (PDF 25.2 MB)

Business lines

Automotive

medical

packaging

technical molding

teletronics

ENERGY EFFICIENCY

Energy efficiency is a concept that in our part of the world became important towards the end of 2008 and the beginning of 2009, at the outset of the world economic crisis. Most business people had, until then, mostly declaratively considered power consumption as a significant element of the total cost analysis. In these considerations, the impact of energy efficiency on the environment pollution had hardly been tackled at all.

Neofyton was among the first companies in Serbia and the region to start actively demonstrating the importance of energy efficiency, both by cutting production costs and therefore increasing profit rates and building awareness of the resource shortage and broader ecological principles.

Energy savings through the use of Neofyton's machines

In comparison with our direct competitors in the field of plastics injection machines, and with the utilization of standard hydraulics with integrated so-called "smart" pumps, our machines consume as much as 50% less energy. The use of servo-hydraulics opens up the potential of savings as high as 70%. We have a very precise power consumption measuring device to prove this.

The company Engel was the first plastics injection machine manufacturer back in 2009, which introduced the power consumption page as a standard component of the control assembly – "Ecograph", where - next to the weight of each product (molded part) in every cycle - total hourly consumption is shown, as well as the specific power consumption per one kilogram of processed plastics (kWh/kg).

ENVIRONMENTAL PROTECTION

The equipment we represent contributes to ENVIRONMENT PROTECTION in several ways.
When it comes to ancillary equipment, above all water chillers by our supplier Eurochille, used for temperature control of both hydraulics and machine servo motors and molds (tools) in which finished products are made, the chiller systems we sell facilitate the use of a new cooling system based on the so-called "adiabatic effect".

In summer, the hydraulics and servo motors of the injection molding machines call for cooling with water at a maximum of 28°C. Using the so-called "free cooling" device with the "adiabatic effect", cooling of process water is performed without cooling compressors (which use freon as the heat exchanger). Heat exchange, i.e. cooling happens exclusively by the use of ventilators, which translates into six- to eightfold savings compared to traditional chillers that use freon-based compressors.

One of our customers has reduced the required cooling energy by 1.400.000 kWh per year, i.e. by about 70.000 EUR, using the "adiabatic" cooling devices. An additional benefit is the elimination of major pollution risks which might arise from emissions of freon into the atmosphere due to tube puncture or breakage.

A similar calculation can be applied to our Engel injection molding machines, as well as to the Piovan granulate dryers.

Neofyton – partner of MB Conveyors

Neofyton is MB Conveyors’ partner for the markets of Serbia, Bosnia and Herzegovina, Macedonia, Nigeria, and Cameroon.

FSRV PLUS independent spiral roller separator – a new generation separator, designed to improve performances of the traditional spiral roller and to achieve particularly precise and efficient separation of the product from the sprue.

Neofyton youtube chanel

Neofyton provides “turnkey” solutions

From system design to machine installation and training

Neofyton partners

Proud members

Contact us

1 + 13 =