Process water chillers
planning/designing
Optimization
Financial solutions
Maintenance
Practical training
Models
GC
GC chillers cover a cooling capacity range included between 4 and 135 kW and are applied within those industrial applications where cooling water is required, from plastic processing to chemical, from mechanical to food industry.
FEATURES
- Structure made of galvanized steel, painted with epoxy-polyester powders.
- Plates evaporator
- Stainless steel storage tank
- Stainless steel centrifugal pumps
- Highly efficient Scroll compressors
- Finned condensers
- Electric panel manufactured to IP54
- Microprocessor control panel
- Tropicalized versions up to 50°C ambient (refrigerant R134a)
- Supplied on castors up to size 18, remaining sizes on feet
- Certificates: CE – PED
- The GC line complies with ECO-DESIGN Directive effective from 01.01.2018.
PLUSES
- Multiple applications (versions with or without tank/pump)
- Reduced footprints
- Re-usable air filter
- Rusty-free hydraulic components
AXevo – AXevo-FC
The AXevo line integrates into a single solution the latest technologies introduced by EUROCHILLER, providing high levels of efficiency and reliability without compromising the specific applications which contributed to the success of the previous AX line, and provides the basis of this new evolutionary series of process water chillers.
FEATURES
- Structure made of galvanized steel, painted with epoxy-polyester powders.
- Shell & tube evaporator
- Stainless steel storage tank
- Stainless steel centrifugal pumps
- Highly efficient Scroll compressors
- Microchannel condensers (finned type for tropicalized versions)
- Electric panel manufactured to IP54
- Microprocessor control system
- Tropicalized versions up to 50°C ambient (refrigerant R134a)
- Certificates: CE – PED
- The AX-EVO line complies with ECO-DESIGN Directive effective from 01.01.2018 (AX-EVO-A/C/W/FC)
PLUSES
- Multiple applications (versions with or without tank/pump/integrated free-cooling)
- Reduced footprints
- Variable speed EC Brushless fans (AX-EVO-C/AX-EVO-FC)
- 7” touch screen remote panel (AX-EVO-FC)
- Various standards
ADXevo – ADXevo-FC
The ADXevo line integrates into a single solution the latest technologies introduced by EUROCHILLER, providing high levels of efficiency and reliability without compromising the specific applications which contributed to the success of the previous AX line, and provides the basis of this new evolutionary series of process water chillers.
FEATURES
- Structure made of galvanized steel, painted with epoxy-polyester powders.
- Shell & tube evaporator
- Stainless steel storage tank
- Stainless steel centrifugal pumps
- Highly efficient Scroll compressors
- Microchannel condensers (finned type for tropicalized versions)
- Adiabatic system for the controlled pre-cooling of the air entering the condensers (ADX-EVO-A/C/FC)
- Electric panel manufactured to IP54
- Microprocessor control system
- Tropicalized versions up to 50°C ambient (refrigerant R134a)
- Certificates: CE – PED
PLUSES
- Multiple applications (versions with or without tank/pump/integrated free-cooling)
- Reduced footprints
- Variable speed EC Brushless fans (ADX-EVO-C/ADX-EVO-FC)
- 7” touch screen remote panel (ADX-EVO-FC)
- Various standards
AXpro
AXpro is a process water chiller that can integrate multiple energy saving technologies in a single solution to optimize consumption in both winter and summer seasons.
FEATURES
- STRUCTURE: The frame is made from galvanized steel, and painted with epoxy powder coating. Control panel IP54 rated. For outdoors and indoors.
- COMPRESSORS: Twin circuit configuration with highly efficient, new generation, hermetic Scroll compressors (Refrigerant R407C).
- FANS: EC brushless.
- CONDENSER: Microchannel condensers and integrated hydro modules provide lower costs of maintenance with reduced refrigerant charges.
- EVAPORATOR: Shell and tube evaporator with high efficiency.
- PUMP AND TANK: Centrifugal pump with stainless steel body and impeller. Integrated tank and pump in the standard version.
- CONTROL: Touch screen panel IQ21 + Icons provide the algorithms to constantly control the chiller parameters. User friendly and interactive Interface.
Approvals:
-
- IEC
- PED 2014/68/UE
- Electrical cubich UL5080a approved
NAX
NAX Series consists of modular air or water cooled chillers developed thanks to the application of the most advanced refrigeration technologies of industrial processes. Efficiency, flexibility , reliability and raised performances are the main features distinguishing this project.
FEATURES
- Structure made of galvanized steel, painted with epoxy-polyester powders.
- Shell & tube evaporator which can be opened for inspection
- Stainless steel storage tank
- Stainless steel high pressure pumps
- Highly efficient Scroll (refrigerant R407c) or semi-hermetic screw (refrigerant R134a) compressors
- Modular air condensers including a sub-cooling circuit
- Electric panel manufactured to IP54
- Microprocessor control system
- Tropicalized versions up to 55°C ambient (refrigerant R134a)
- Certificates: CE – PED
- The NAX line complies with ECO-DESIGN Directive effective from 01.01.2018
PLUSES
- Multiple applications
- Reduced footprints and sturdy frame
- User’s friendly
TFC
TFC units differ from traditional chillers by the addition of a finned air/water heat exchange battery (free-cooler), a 3-way water flow modulating valve, pressure transducers and temperature probes supplying data to a microprocessor with unique software which then governs the operating parameters of the system. By exploiting low ambient air temperatures to cool water circulating through the finned heat exchange battery (free-cooler), cold water can be produced at minimal cost resulting in considerable energy savings.
FEATURES
- Structure made of galvanized steel, painted with epoxy-polyester powders
- Shell & tube evaporator which can be opened for inspection
- Stainless steel storage tank
- Stainless steel high pressure pumps
- Highly efficient Scroll (refrigerant R407c)
- Finned coil for the air/water heat exchange (free-cooler)
- 3-way valve for the water flow control
- Electric panel manufactured to IP54
- 7” touch screen remote panel
- Certificates: CE – PED
- The TFC line complies with ECO-DESIGN Directive effective from 01.01.2018
PLUSES
- Modular concept for increased free-cooling capacities
- Reduced footprints and sturdy frame
- Self-draining, no-glycol circuit (TFC-SA-FT-AD version)
- Various standards (Electronic expansion valves, fans speed control)
DY-NAX
DY-NAX units are air cooled chillers which can be located outdoors without shelter.
FEATURES
- Structure manufactured from pre-painted galvanized steel
- Brazed plate or shell & tube evaporator
- External pump and tank groups (optional)
- Highly efficient Scroll compressors (refrigerant R407c)
- V-shaped air condensers
- Electric panel manufactured to IP54
- Microprocessor control panel
- Tropicalized versions up to 52°C ambient (refrigerant R134a)
- Certificates: CE – PED
- The DY-NAX line complies with ECO-DESIGN Directive effective from 01.01.2018 (DY-NAX-P/FT)
PLUSES
- Outdoor installation without shelter
- Easy accessibility of the cooling components
- 7” touch screen remote panel (optional)
- LN (low-noise) versions with EC Brushless fans with low revs
- Highest energy efficiency, lowest noise impact
- Various standards
ADY-NAX
ADY-NAX units are air cooled adiabatic chillers which can be located outdoors without shelter.
FEATURES
- Structure manufactured from pre-painted galvanized steel
- Brazed plate or shell & tube evaporator
- External pump and tank groups (optional)
- Highly efficient Scroll compressors (refrigerant R407c)
- V-shaped air condensers
- Adiabatic system for the controlled pre-cooling of the air entering the condensers (ADY-NAX)
- Electric panel manufactured to IP54
- Microprocessor control panel
- Tropicalized versions up to 52°C ambient (refrigerant R134a)
- Certificates: CE – PED
PLUSES
- Outdoor installation without shelter
- Easy accessibility of the cooling components
- 7” touch screen remote panel (optional)
- LN (low-noise) versions with EC Brushless fans with low revs
- Highest energy efficiency, lowest noise impact
- Various standard
GRP DY-NAX – ADY-NAX
The GRP pump and tank groups are the natural complement of the DY-NAX chillers.
They can be constructed with one or more pumps, the size of the storage tank changes according to the plant requirements and they are supplied complete with connection system and interface with the chiller.
FEATURES
- Base made of galvanized steel, painted with epoxy-polyester powders.
- Stainless steel centrifugal pumps
- Galvanized steel tank complete with automatic filling system
- Electrical junction box
ICEtemp
ICETEMP is a water cooled chiller for inside installation suitable for the precise temperature control of injection moulds.
FEATURES
- Frame constructed from pre-painted metal sheet
- Plates evaporator
- Stainless steel storage tank
- Stainless steel, horizontal multi-stage pumps
- Scroll compressors (refrigerant R407c)
- Inspectable shell and tube condenser
- 7”soft touch control panel with customized PLC
- Certificates: CE – PED
- The ICETEMP line complies with ECO-DESIGN Directive effective from 01.01.2018
PLUSES
- Multiple applications
- Accurate temperature control (tolerance +/- 0,1°C)
- Dynamic free-cooling
- Flow rate and pressure monitoring
- Cooling or heating function from -5°C to 90°C
ADcooler
ADcooler is an adiabatic dry-cooler using the ambient air to cool the process water. If we take advantage of the evaporation of water resulting from the use of the adiabatic pads, we get an inlet air temperature to the exchange batteries (dry-cooler) which is much lower than the ambient one. So it happens that the ADcooler system cools the water at a temperature which is always lower than the ambient one, with no contamination or consumption of process water.
FEATURES
- Structure manufactured from pre-painted galvanized steel
- Heat exchanger coil made of copper/aluminium
- Large surface adiabatic pads
- Microprocessor control system (optional for Dcooler)
- Certificates: CE
PLUSES
- No process water consumption
- No water spraying in the air
- No water stagnation into adiabatic system
- High performance even with air temperatures above 40°C
- Self-draining version for operation withour glycol (optional)
Dcooler
Dcooler Series is a dry-cooler that Eurochiller designed to offer the market a high innovative content but at a very competitive price.
FEATURES
- Structure manufactured from pre-painted galvanized steel
- Heat exchanger coil made of copper/aluminium
- Microprocessor control system (optional for Dcooler)
- Certificates: CE
PLUSES
- No process water consumption
- High performance even with air temperatures above 40°C
- Self-draining version for operation withour glycol (optional)
GRP ADcooler – Dcooler
The GRP pump and tank groups are the natural complement of the ADCOOLER/DCOOLER lines.
They can be constructed with one or more pumps, the size of the storage tank changes according to the plant requirements and they are supplied
complete with connection system and interface with the chiller.
FEATURES
- Base made of galvanized steel, painted with epoxy-polyester powders.
- Stainless steel centrifugal pumps
- Galvanized steel tank complete with automatic filling system
- Electrical junction box
Categories
Process water chillers
Temperature control units
Process air chillers
Process air dehumidifiers
Process water chillers
Eurochiller, a manufacturer of industrial cooling systems, stands out among its competitors in that it constantly develops “green” technologies and chillers with high energy efficiency.
Neofyton, in co-operation with Eurochiller has expertise in designing and start-up of central cooling systems.
Philosophy of Eurochiller (PDF 3.76 MB)
Products of Eurochiller (PDF 1.30 MB)
Business lines
Automotive
medical
packaging
technical moulding
teletronics
ENERGY EFFICIENCY
Energetska efikasnost u industriji je pojam koji je na našim prostorima postao bitan krajem 2008. i početkom 2009. godine, sa početkom svetske ekonomske krize. Većina privrednika je, do tada, najčešće deklarativno razmatrala trošak struje, kao bitan element kompletnog pregleda troškova. Pritom uticaj energetske efikasnosti na zagađenje prirode gotovo uopšte nije bio razmatran.
Kompanija Neofyton je među prvima u Srbiji i regionu počela aktivno prezentovanje značaja energetske efikasnosti, kako zbog smanjenja troškova proizvodnje, pa samim tim i povećanja profitne stope, tako i zbog podizanja svesti o ograničenosti resursa i širim ekološkim principima.
Ušteda energije korišćenjem Neofyton mašina
U poređenju sa direktnim konkurentima u sferi mašina za brizganje plastike, a korišćenjem standardne hidraulike u koju su ugrađene tzv. “smart” pumpe, naše mašine troše i do 50% manje energije. Korišćenjem servo-hidraulike, postoji potencijal za uštedu do čak 70%. Posedujemo veoma precizan uređaj za merenje potrošnje električne energije, kojim se to i dokazuje.
Kompanija Engel je bila prvi proizvođač mašina za brizganje plastike, još 2009. godine, koji je u svoj upravljački sklop uveo, kao standardnu opciju, stranicu za prikaz potrošnje struje – “Ecograph”, gde se navođenjem težine za svaki proizvod (kalup), u svim ciklusima dobija podatak, kako o ukupnoj potrošnji struje po satu, tako i o specifičnoj potrošnji struje po kilogramu prerađene plastike (kWh/kg).
ENVIRONMENTAL PROTECTION
Oprema koju zastupamo doprinosi OČUVANJU ŽIVOTNE SREDINE na nekoliko načina.
Kada govorimo o pratećoj opremi, a pre svega o čilerima za hlađenje vode našeg dobavljača Eurochille, kojima se temperira kako hidraulika i servo motori u mašinama, tako i kalupi (alati) u kojima se i formiraju gotovi proizvodi, čilerski sistemi koje mi prodajemo omogućavaju novi koncept hlađenja korišćenjem tzv. “adijabatskog efekta”.
U letnjem periodu hidraulika i servo motori mašina za brizganje zahtevaju hlađenje vodom temperature do 28°C. Korišćenjem tzv. “free cooling” uređaja sa “adijabatskim efektom”, hlađenje procesne vode se odvija bez korišćenja rashladnih kompresora (koji koriste freone za izmenu toplote). Izmena toplote, tj. hlađenje se odvija isključivo korišćenjem ventilatora, čime se postiže ušteda od 6 do 8 puta u odnosu na klasične čilere koji koriste kompresore sa freonom.
Jedan od naših kupaca je, korišćenjem “adijabatskih” uređaja za hlađenje, umanjio potrebnu količinu električne energije za hlađenje, za 1.400.000 kWh/godišnje, tj. za oko 70.000 EUR. Dodatna prednost je odsustvo rizika, da usled pucanja cevi dođe do curenja freona u atmosferu i velikog zagađenja.
Slična računica se može primeniti na naše Engel mašine za brizganje plastike, kao i na Piovan sušare za sušanje granulata.
Eurochiller company
Eurochiller – maximum energy efficiency, great energy savings, longer service life of compressors
Neofyton is Eurochiller’s partner for the markets of Serbia, Bosnia and Herzegovina, Macedonia, Nigeria, and Cameroon. Find out more about us, have a look at our capabilities and our installations all over the world.
Neofyton youtube chanel
Neofyton provides “turnkey” solutions
From system design to machine installation and training
Neofyton partners
Proud members
