This MB drum separator mod. SR with stainless steel rollers (AISI 304 ),
compatible FDA and suitable for metallic products, allows extremely precise and long-lasting adjustment
(in this case 4,5 mm), avoiding the slight ovalization effect that can sometimes
occur with PVC rollers after long use .
Also note the installation of safety micro switch to stop rotation of the drum at the opening of the top cover,
and the special-design discharge chute.
- Separator with rotary drum consisting of 24 PVC rollers having 50 mm diameter and 800 mm length (the distance between the rollers can be adjusted MANUALLY)
- Each separator has its own Inverter for regulating the drum rotation speed; Possible adjustment range: minimum 4 rotations/minute, maximum 20 rotations/minute
- In the SR separator the adjustment of the distance between the rollers is manual
- The drum frame is supported by two threaded rods which make it possible to adjust the inclination of the drum on both sides
- Finding the correct ratio between the drum rotation speed and a slight counter-slope allows for effective separation of the product from the sprue
- In standard separators the roller drum can be exchanged with the perforated drum
- Motor connection voltage: 220 Volts/50 Hz., single-phase