Transport and storage system composed by an inclined conveyor mod. N-TR and a Duck dispenser
combined on the same support, to allow easy movement of the integrated system. In this case,
the system is programmed to fill 3 boxes for a given time, but it is possible
to set up to 8 different working recipes, changing number and position of the boxes,
choosing the number of different unloading positions inside each box, and setting the filling
logic to count the signals coming from the machine.
N-TR Conveyor
Sturdy frame made of primary extrusion aluminium section, Alloy 6060, protected by
anodisation treatment thickness 15 micron
Standard cut-proof, oil-proof belt, with smooth green Polyurethane covering
(ref. Pantone 320); with heat-welded slats h=30mm pitch 400 mm; vulcanised belt joint
Minimum and maximum temperature resistance of belt -10°C to +90°C
Standard transmission group consisting of 0.12 kW three-phase, asynchronous motor
coupled with worm reduction unit with permanent lubrication
Fixed standard conveyor speed 3 m/min
Conveyor complete with Siemens Start and Stop switch/motor cut-out with 5 m cable and 4P CE plug (3 phases+ground)
Standard motor supply voltage 400 Volts/50 Hz
Duck dispenser
Duck
dispenser can work with two different methods not compatible with one another:
– using an A/C voltage-free signal, coming from the IMM at each moulding cycle
– setting the filling time for each container
The chute of the DUCK can rotate through 360° and can conduct the product to any point of the route
Capacity: do not exceed 2 kg for each product
Installed power of motor for chute rotation: 0.06 kW
Standard motor supply voltage: 400 Volts/50 Hz
In addition to MB Conveyors, Neofyton is a partner for the sale and installation of
Engel plastic injection molding machines
for the markets of Serbia, BiH, Macedonia, Croatia, Montenegro, Nigeria, Cameroon and Ghana,
as well as equipment for the plastics industry of TRIA, Sipa, Eurochiller and Piovan